Locks bolts, nuts, screws and tap bolts which should be able to be unscrewed later on. Seals screw threads and protects them from rusting.
Working conditions
Do not use at temperatures below +10°C
Preliminary surface treatment
Parts to be locked must be dry and free of dust and oil. Degrease with Thinner for Bison Kit or acetone. Remove any loose rust beforehand with a wire brush or similar.
Directions for use
Apply Bison Metal Lock to screw thread and assemble. Bison Metal Lock hereby also works as a lubricant. After assembly, do not move or shift parts.
Points of attention
Bison Metal Lock is an anaerobic adhesive. This means that the product cures in combination with metal and in the absence of oxygen. Therefore, adhesive outside the joint will not cure, due to the presence of oxygen.
Stains/residue
Remove fresh stains immediately with acetone. Remove cured adhesive with a sharp knife.
Storage conditions
Store in a dry, cool and frost free place.
