BISON Colle Montagekit extreme grip 370g

BISON MONTAGEKIT® EXTREME GRIP Extra strong, solvent-free assembly adhesive with an extremely high initial bond strength 370 g

364103
En stock
1 390 FCFP
TTC

WHAT IS IT?

PROPERTIES

  • Extremely high initial bond strength: 120 kg/m²
  • Very high final bond strength
  • Easy to apply
  • Filling
  • Particularly for interiors
  • Solvent-free
  • Permanently elastic
  • Universally applicable
  • Suitable for uneven surfaces
  • Correctable
  • Moisture resistant
  • Temperature resistant
  • With closable spout

Infos :

Dans la limite des stocks disponibles. Le stock affiché est donné à titre indicatif.
Photos de présentation, non contractuelles.

NOTE IMPORTANTE : 

  • Pour les commandes et les demandes de devis, le délai de traitement est de 1 à 7 jours ouvrés après confirmation de commande.
  • Pour les livraisons, le délai d’expédition est de 5 à 8 jours ouvrés après réception et traitement du paiement de votre commande.
  • Les livraisons s’effectuent du lundi au vendredi en fonction du planning du magasin.
  • Il n’est pas possible de choisir un jour ni une heure de livraison. 
  • Les retraits magasin se font sur rendez-vous, merci d'attendre l'appel de nos hôtesses avant de vous déplacer.

Merci pour votre compréhension.

Description

WHAT DOES IT DO?

SUITABLE FOR:

  • Ideal for assembling all kinds of (building) materials, such as wood, stone, concrete, metal, many synthetics, gypsum and polystyrene foam onto (porous) surfaces.
  • Very suitable for attaching, e.g., timber framework, skirting boards, doorsteps, window sills, construction boards, paneling, laths, wood strips, ducts, name plates, house numbers, wall covering sheets, panels, thresholds, ceramic tiles, sockets and electrical boxes.
  • Also very suitable for decoration materials, such as ornaments and decorative edgings in plaster/polystyrene/polyurethane, name plates, suspension hooks. Also extremely suitable for surface bonding.

GETTING STARTED

BEFORE USE:

Working conditions

Use only at temperatures above +5°C.

Surface requirements

Both parts must be dry, clean and free of dust and grease. One of the two parts must be porous (absorbent).

Tools

Apply cartridge contents using a sealant gun (a Bison Power Pistol, for example). If necessary, use a rubber mallet to tap lightly. For surface bonding use a glue spreader (2 mm).

Preparation of product

Before using open cartridge at the top by cutting off the plastic nipple above the thread with a sharp knife. Fix the nozzle onto the cartridge and cut at an angle to the desired diameter.

DURING USE:

Directions for use

Depending on the weight of the material, apply the adhesive evenly in strips or dots at intervals of between 20 and 30 cm. Always apply adhesive to the corners and along the edges. For surface bonding apply adhesive thinly and evenly on one side using a glue spreader. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary.

Advice

  • We recommend Bison Montagekit® Super Strength for fastening materials under strain.
  • We recommend the Bison Poly Max® for fastening a non-porous material on a non-porous substrate.
  • We recommend Bison Poly Max® for fastening materials in areas with permanent high humidity and/or prolonged contact with water.
  • For fastening natural stone, we recommend Bison Poly Max®.

AFTER USE:

Stains/residue

Use water for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Storage conditions

Close container properly and store in a dry, cool and frost-freeplace.

Détails du produit

8710439147062

Documents joints

Les clients qui ont acheté ce produit ont également acheté...

20 autres produits dans la même catégorie :

Produit ajouté à mes favoris
Produit ajouté au comparateur