BISON SILICONE UNIVERSAL Universal silicone...

BISON SILICONE UNIVERSAL Universal silicone sealant Blanc - 280 mL

364082
En stock
1 150 FCFP
TTC

WHAT IS IT?

PROPERTIES

  • (Sea)water resistant
  • Permanently elastic
  • UV and all-weather resistant
  • Mould resistant
  • Excellent bonding on all surfaces
  • Chemical resistant
  • Colourfast
  • Easy to apply
  • Resistant to temperatures between -50°C and +120°C

Infos :

Dans la limite des stocks disponibles. Le stock affiché est donné à titre indicatif.
Photos de présentation, non contractuelles.

NOTE IMPORTANTE : 

  • Pour les commandes et les demandes de devis, le délai de traitement est de 1 à 7 jours ouvrés après confirmation de commande.
  • Pour les livraisons, le délai d’expédition est de 5 à 8 jours ouvrés après réception et traitement du paiement de votre commande.
  • Les livraisons s’effectuent du lundi au vendredi en fonction du planning du magasin.
  • Il n’est pas possible de choisir un jour ni une heure de livraison. 
  • Les retraits magasin se font sur rendez-vous, merci d'attendre l'appel de nos hôtesses avant de vous déplacer.

Merci pour votre compréhension.

Description

WHAT DOES IT DO?

SUITABLE FOR:

Suitable for sealing joints, seams and cracks in all kinds of applications. Suitable for sealings in sanitary and construction applications, for example in the house, glass construction, display case construction, car, boat and caravan. Also suitable for bonding and sealing clear glass, display cases and display windows. Adheres to almost all materials. Not suitable for bitumen, polyethylene, polypropylene, PTFE and aquariums.

GETTING STARTED

BEFORE USE:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

The surface should be dry, clean and free of dust and grease. Synthetics should first be roughened and/or pre-treated with Bison Silicone Primer.

Preliminary surface treatment

For a good result, cover the joint’s edges with masking tape. If necessary, prevent three-sided bonding by filling the joint with a foam backer rod or PE film.

DURING USE:

Handling of packaging

Screw the cap from the tube and pierce the tube membrane with the point at the top of the cap in a twisting movement. Screw synthetic nozzle onto the tube and then cut diagonally.

Directions for use

Inject the sealant evenly into the joint, then within 10 minutes tool with a putty knife or other tool, moistened with a soap solution. Curing: 3 mm in 24 hours, 5 mm in 3 days. Tip: By applying masking tape along the joints completely smooth seams are achieved, remove the tape immediately after tooling.

Points of attention

Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing. Always consider a joint of at least 6 mm wide. By applying masking tape along the joints completely smooth seams are achieved, remove the tape immediately after smoothing.

AFTER USE:

Stains/residue

Immediately remove stains with white spirit. Cured sealant can only be removed mechanically.

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Détails du produit

8710439144061

Documents joints

Les clients qui ont acheté ce produit ont également acheté...

20 autres produits dans la même catégorie :

Produit ajouté à mes favoris
Produit ajouté au comparateur