BISON SILICONE GLASS Silicone sealant for glazing applications Transparent - 310 mL
BISON SILICONE GLASS Silicone sealant for glazing applications Transparent - 310 mL
BISON SILICONE GLASS Silicone sealant for...
BISON SILICONE GLASS Silicone sealant for...

BISON SILICONE GLASS Silicone sealant for glazing applications Transparent - 310 mL

364081
En stock
1 325 FCFP
TTC

WHAT IS IT?

PROPERTIES

  • (Sea)water resistant
  • 100% silicone
  • Permanently elastic
  • UV and all-weather resistant
  • Easy to apply
  • Resistant to temperatures between -50°C and +180°C
  • Chemical resistant

WHAT DOES IT DO?

SUITABLE FOR:

Suitable for sealing joints, seams and cracks in the house, glass construction, display case construction, cars, boats and caravans. Especially suitable for bonding and sealing clear glass, frameless aquariums, display cases, display windows, glass terrariums, water basins and (double) glass constructions. Also suitable for sealing joints in glazing systems. Adheres to clear glass (non-coated, single-layered), ceramics, glazed tiles, enamel, metals (including aluminium and stainless steel) and various synthetics.

Infos :

Dans la limite des stocks disponibles. Le stock affiché est donné à titre indicatif.
Photos de présentation, non contractuelles.

NOTE IMPORTANTE : 

  • Pour les commandes et les demandes de devis, le délai de traitement est de 1 à 7 jours ouvrés après confirmation de commande.
  • Pour les livraisons, le délai d’expédition est de 5 à 8 jours ouvrés après réception et traitement du paiement de votre commande.
  • Les livraisons s’effectuent du lundi au vendredi en fonction du planning du magasin.
  • Il n’est pas possible de choisir un jour ni une heure de livraison. 
  • Les retraits magasin se font sur rendez-vous, merci d'attendre l'appel de nos hôtesses avant de vous déplacer.

Merci pour votre compréhension.

Description

GETTING STARTED

BEFORE USE:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

The surface must be dry, clean and free of dust, rust and grease.

Preliminary surface treatment

For a good result, cover the joint’s edges with masking tape. If necessary, prevent three-sided bonding by filling the joint with a foam backer rod or PE film.

Tools

Apply cartridge with a Power Pistol. Multi Tool to open the cartridge and tooling the sealant.

DURING USE:

Handling of packaging

Use sealant gun to handle cartridge. Open the cartridge by cutting off the plastic nipple on the top side at the screw thread with a sharp knife. Screw on the nozzle and chamfer at the desired width.

Directions for use

Inject the sealant evenly into the joint and tool within 10 minutes with a putty knife of Bison Silicone Multi Tool, moistened with a soap solution. After approx. 15 minutes, a surface skin will form. Before putting plants and fish in the aquarium, bonded and/or jointed aquariums will need to air for 4-8 days. After that, the aquarium must have been filled with fresh water 3 to 4 times over a 24-hour time period.

Points of attention

Silicone cures under the influence of air humidity. Contact with air humidity is therefore absolutely necessary during curing. By applying masking tape along the joints completely smooth seams are achieved, remove the tape immediately after smoothing.

AFTER USE:

Stains/residue

Remove stains immediately with acetone. Cured sealant can only be removed mechanically.

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Détails du produit

8710439016948

Documents joints

Les clients qui ont acheté ce produit ont également acheté...

20 autres produits dans la même catégorie :

Produit ajouté à mes favoris
Produit ajouté au comparateur